The Orca Core and the Orca Display Kit are designed to be installed by boaters and professional integrators alike.

Orca co-pilot marine navigation chartplotter weather forecast

The installation may require drilling holes in your boat’s dashboard and will require connecting the system to your boat’s power supply and NMEA 2000 network. It is your own, or your integrator’s responsibility to install the equipment in a safe manner.

If this sounds daunting, don’t hesitate to reach out to us at hello@getorca.com and we’ll guide you through any questions you may have. We’re also available for a video call to give you on-site consultation before or during your installation if needed. E-mail us to book a time.

Expect to use thirty minutes to one hour to install an Orca Core, and about thirty minutes to install the Orca Charging Mount.

We recommend that you read through the entire installation guide before beginning to install your new Orca product. Should you have any questions, please reach out at hello@getorca.com.

Next up, how to install your Orca Core.

Did this answer your question?