Raymarine has partnered with Orca to allow sending Routes wirelessly from Orca to your Axiom chartplotter.
This allows Axiom owners to leverage the Orca App to plan routes at home and send those to the Axiom once they are aboard.
What do I need to send Routes to my Axiom?
The experience works with Raymarine Axiom I and II, as well as with YachSense Link. You need to have the following version:
Orca App: Version greater than 2025.x.x
Axiom I: Version greater than v4.9.x (to be confirmed)
Axiom II: Version greater than v4.9.x (to be confirmed)
How do I connect Orca to my Axiom MFD?
There are two ways to get the Axiom's Wi-Fi network details:
Scanning the QR Code shown on the Axiom unit or,
Input the Wi-Fi credentials manually.
On the Orca App, follow the next steps:
Navigate to My Boat --> Boat Settings > Integrations > Raymarine > Connect Axiom.
Follow the instructions on the screen to connect to the Axiom's Wi-Fi/YachtSense Link.
To get the Axiom's Wi-Fi network details follow these steps:
To display the QR Code on your Axiom unit, please follow the instructions on the Orca App.
Alternatively, to get the Wi-Fi credentials, go to Settings > This Display > Wi-Fi Sharing.
Enable Allow devices to connect via Wi-Fi.
Press Configure to find the QR code and Wi-Fi credentials.
Once the connection has been established, the linked Axiom will be listed in Boat Settings > Integrations > Raymarine.
Please note that your Orca account will be linked to the Axiom. Only one user account per Axiom is allowed. If you wish to connect with a different account, you need to unpair it first. See Disable App Sync below.
How do I send Routes to my Axiom?
Once the connection has been established, you will see the Axiom in your list of connected devices. To start sending routes you need to have at least one Axiom connected, and you must be within range.
On the Orca App, follow the next steps:
Navigate to Spots and Routes.
Select the route you want to send.
Press the three dots menu and select Send to Axiom.
A notification will confirm that the route has been received. Please note that only one route can be stored at a time in your Axiom unit.
How do I delete the connection?
Deleting the connection between Orca and your Axiom unit will unpair your boat from the Axiom device. If you have multiple Axioms connected to a boat, all will be disabled.
On the Orca App, follow the next steps:
Navigate to Boat Settings > Integrations > Raymarine > Disable App Sync.
This will disconnect your Axiom devices from the boat.
On the Raymarine Axiom unit, please follow the next steps:
Navigate to My Data > Mobile Sync > Disable Orca App Sync.
This will remove all Axiom devices from the previously paired user.
Troubleshooting
Failed Wi-Fi Connection / Axiom Not Found
Ensure you are within range of the Axiom device.
Verify that Allow devices to connect via Wi-Fi is enabled in Settings > This Display > Wi-Fi Sharing on your Axiom.
If the issue persists, reconnect your Axiom following the steps in Connecting an Axiom. No need to disable App Sync.
Axiom Already Connected to an Orca Account / Not Authorized to Connect
This error indicates that the Axiom is linked to a different Orca account.
To resolve this:
On your Axiom, navigate to My Data > Mobile Sync > Disable Orca App Sync.
After disabling, you can reconnect the Axiom to the desired Orca account.
\