Verifying your NMEA 2000 connected devices
Written by Jorge Sevillano
Updated over a week ago

You can diagnose and verify the status of the NMEA 2000 network on your boat.

In the Settings > Orca Core menu, press Connected Devices to view other devices connected to your NMEA 2000 network.

In this section, you can see the real-time data for every sensor.

If you don’t have any other devices connected to the network, you will see the sensors included in the Orca Core. These are Heading, Vessel motion, and Battery.

You have access to all the sensors during the navigation from the instruments panel.

Did this answer your question?